1. Before buying, please take note that you should measure your wall first or let a Mainline Power Specialist do an ocular inspection at your place (click button below to book for an ocular inspection)

2. Please make sure that you have an existing outlet or wire (abang) where the track can tap into.

3. Once you have measured your wall, now it's time to purchase a track set.

The Mainline Power Track Set is composed of 4 things:

Mainline Power Track + Aluminum C-Channel + End Cap + Terminal Block

The terminal block is where you will tap the wires in. If the wire is on the left then you need a left terminal block and vice versa.

The end cap is the opposite end of the terminal block. If you have a left terminal block then you need a right end cap.

4. Please take note that sockets are purchased separately. You can choose from the sockets available in the products section.

5. Lastly, it is possible to have custom sizes. We can cut them to whatever length you want.

Example 1: f you need .8 meters, you just need to buy 1 meter then let us cut it.

Example 2: if you need 1.6 meters, you just need to buy 2 meters then let us cut it.

and so on and so forth.

6. After buying, you can check the installation guide here or you can book an electrician with us below